MK Tech

Modification of a chassis frame for batteries tightening

The project involved a modification of the chassis frame to rebuild it for a new car type. The rebuilt frame part was the one where an auxiliary battery should have been inserted. The device was modified to enable inserting the new PWR battery as well as the PHEV battery for which it had originally been designed into the car chassis frame. Besides inserting the batteries, it was also necessary to secure the screw points to tighten the PWR battery using an automated tightening station in the line system. And what´s more, we had to take into consideration the integration of the battery using a manipulator (designed by us as well) for inserting the battery into the frame.

Project type Single-purpose devices

Interesting facts

The above-mentioned screw points were as follows: 1 common screw point 2 new screw points Both types of screw points are screwed at an angle. As a result, it was necessary to rebuild the automated station so that the tightening arms could be tilted.

Should you have any questions, feel free to contact us.

Contact