MK-Tech

Pallet for cutting off sprues of brake calipers castings – type 1

We have designed several types of these pallets, all of them working on the same principle. The casting containing 2-4 pieces of brake calipers is manually placed on the pallet. The correct position is guaranteed by a series of precise seatings, against which the casting is pressed by pneumatic clamps. After casting, the robot simply cuts off the excess parts from the calipers, which slide on the discharge plates.

Beginning of the project 08.04.2017
End of the project 26.07.2017
Project type Robotics and automation

Should you have any questions, feel free to contact us.

Contact